Software/Firmware Updates
A Dedication to Problem Solving

 

 

2090 Flashable Firmware v3.25http://ets-lindgren.com/sites/etsauthor/SoftwareFirmware/ETS-Lindgren_Model_2090_V3.25.zip2090 Flashable Firmware v3.252019-08-30T05:00:00ZThis firmware file is to be used with the Flash Upgrade Wizard to enable flash-upgrading the 2090 multi-device controller.
EMCenter USB Drivers (zip format)http://ets-lindgren.com/sites/etsauthor/SoftwareFirmware/EMCenter_USB_Drivers_2.12.28_Signed.zipEMCenter USB Drivers (zip format)2020-02-17T06:00:00ZThis driver is required for remote control of the EMCenter 7000-001 and Power Meters 7002-002/003/004/005/006 using the USB Port. This file is not needed if using an internet connected computer running Windows 7, 8 or 10.
EMPower ETSI User Guidehttp://ets-lindgren.com/sites/etsauthor/SoftwareFirmware/1697575 A EMPower ETSI User Guide.pdfEMPower ETSI User Guide2018-11-14T06:00:00ZUser guide for ETSI testing with the EMPower 7002-006
ETSProbeDll_1.3.6 http://ets-lindgren.com/sites/etsauthor/SoftwareFirmware/ETSProbeDll_1.3.6.exe.zipETSProbeDll_1.3.6 2012-06-15T05:00:00Z.
FM5004 Download (zip file)http://ets-lindgren.com/sites/etsauthor/SoftwareFirmware/FM5004download.zipFM5004 Download (zip file)2010-09-20T05:00:00ZTo install, simply download the ZIP file and unzip to a temporary directory on a PC and run the dl5004 application. Refer to the included "Download Instructions.txt" file for more information.
FM5004 firmware update Version 5.4 (zip file)http://ets-lindgren.com/sites/etsauthor/SoftwareFirmware/rev_5_4_firmwareAndNotes.zipFM5004 firmware update Version 5.4 (zip file)2007-08-09T05:00:00Z
Flash Upgrade Wizard Ver 4.0http://ets-lindgren.com/sites/etsauthor/SoftwareFirmware/ETSFlashWizardSetup_Ver_4_0_Rev_5.zipFlash Upgrade Wizard Ver 4.02018-07-19T05:00:00ZTo install the flash upgrade wizard, simply download the EXE file to a temporary directory on a PC and run the flash upgrade wizard setup and follow the on-screen instructions.
HI-2200 Flashable Firmware Ver 2.32http://ets-lindgren.com/sites/etsauthor/SoftwareFirmware/HI2200 Release Ver 2_32.zipHI-2200 Flashable Firmware Ver 2.322018-05-16T05:00:00ZThis firmware file is to be used with the Flash Upgrade Wizard to flash-upgrade the HI-2200 RF Survey Meter.
HI-2200 Uploader Version 3.2.15 (zip file)http://ets-lindgren.com/sites/etsauthor/SoftwareFirmware/HI2200_Uploader_Version3.2.15.zipHI-2200 Uploader Version 3.2.15 (zip file)2007-08-27T05:00:00ZProgram that uploads data collected with the HI-2200 into a PC for analysis.
HI-4413 ProbeView 3600 Install (zip file)http://ets-lindgren.com/sites/etsauthor/SoftwareFirmware/HI-4413ProbeView3600install.zipHI-4413 ProbeView 3600 Install (zip file)2007-08-03T05:00:00ZThis file is the install package for the HI-4413 ProbeView 3600. Please download the zip file to install. The instructions are included in the zip or download the pdf.
HI-6100 Upgrade Ver 2.7.6http://ets-lindgren.com/sites/etsauthor/SoftwareFirmware/HI6100 Ver 2_7_6.zipHI-6100 Upgrade Ver 2.7.62019-02-20T06:00:00ZThis file is the upgrade package for the HI-6100 monitor version 2.7. Please download the zip file to install. The upgrade instructions are included in the zip file.
HI1710AReleaseVer 3_11http://ets-lindgren.com/sites/etsauthor/SoftwareFirmware/HI1710AReleaseVer 3_11.zipHI1710AReleaseVer 3_112015-03-13T05:00:00ZThis firmware file is to be used with the Flash Upgrade Wizard to enable flash-upgrading a HI-1710A Microwave Oven Survey Meter that has revision 3.00 or higher installed.
Installing and Using Firmware Flash Upgrade Wizardhttp://ets-lindgren.com/sites/etsauthor/SoftwareFirmware/Installing and Using Firmware Flash Upgrade Wizard.pdfInstalling and Using Firmware Flash Upgrade Wizard2018-11-14T06:00:00ZInstructions for using the Flash Upgrade Wizard
MB-V Multi-Sensor Flashable Firmware v2.15http://ets-lindgren.com/sites/etsauthor/SoftwareFirmware/ETS-Lindgren_Multi-Sensor_Motorbase-V_V2.15.zipMB-V Multi-Sensor Flashable Firmware v2.152018-08-01T05:00:00ZThis firmware file is to be used with the Flash Upgrade Wizard to enable flash-upgrading the motor-base-V Multi-Sensor assembly.
MB-V Standard Flashable Firmware v2.15http://ets-lindgren.com/sites/etsauthor/SoftwareFirmware/ETS-Lindgren_Motorbase-V_V2.15.zipMB-V Standard Flashable Firmware v2.152018-08-01T05:00:00ZThis firmware file is to be used with the Flash Upgrade Wizard to enable flash-upgrading the motor-base-V assembly.
NSA Calculator (zip file)http://ets-lindgren.com/sites/etsauthor/SoftwareFirmware/NSA_Calc.zipNSA Calculator (zip file)2005-12-03T06:00:00Z
Probe View for Laser Probes - Ver 2.0.8 (zip file) http://ets-lindgren.com/sites/etsauthor/SoftwareFirmware/ProbeViewLSRVer2.0.8.zipProbe View for Laser Probes - Ver 2.0.8 (zip file) 2007-10-20T05:00:00ZThis software allows viewing readings from the following probes: HI-6153 and HI-6105. Added support for the HI-6153 probe and added laser safety message to appear each time laser is powered on.
ProbeView LT Ver. 1.05 (zip file)http://ets-lindgren.com/sites/etsauthor/SoftwareFirmware/PLiteUpgradeVer1.05.zipProbeView LT Ver. 1.05 (zip file)2008-04-07T05:00:00ZThis software combined with the HI-4413P Fiber Optic Modem allows a laptop or PC to communicate directly with a field sensor using the RS-232 communication port. This latest update supports the new HI-6022 probe.
Software/Firmware Updateshttp://ets-lindgren.com/sites/etsauthor/SoftwareFirmware/Connecting to an ETSL Ethernet Device.pdfSoftware/Firmware UpdatesHow to connect to an ETS-Lindgren Ethernet device for the first time
Upgrading Firmware HI-6100 Instructions.pdfhttp://ets-lindgren.com/sites/etsauthor/SoftwareFirmware/HI-6100Ver2_7.pdfUpgrading Firmware HI-6100 Instructions.pdf2016-04-26T05:00:00ZThese are the instructions for the HI-6100 upgrade.
Windows 10 USB drivers for HI-4413USB and HI-6113http://ets-lindgren.com/sites/etsauthor/SoftwareFirmware/Signed_HI-Driver.zipWindows 10 USB drivers for HI-4413USB and HI-61132018-02-26T06:00:00ZThis driver is required for all HI-4413USB USB To Fiber-Optic Interface’s and all HI-6113 Laser Data Interface's manufactured after 3/31/2008. This file is not needed if using an internet connected computer running Windows 10.