Dual Line Single Phase Filters (LRX Series)
ETS-Lindgren's Dual Line Single Phase Filters are individual, stand-alone dual circuit filters from our LRX series of power line filters.

 

 

ETS-Lindgren's Dual Line Single Phase Filters are individual, stand-alone dual circuit filters from our LRX series of power line filters. ETS-Lindgren manufactures UL Listed power line filters in a variety of mechanical configurations to meet your requirements. The basic, general purpose filter is the LRX series. 

The Dual Line Single Phase Filters are designed for wall-mounted installation. This dual circuit power line filter can be used on AC or DC power lines including two wire AC systems with both lines above ground or three wire AC systems where one of the conductors is at ground potential and grounded to the filter case.

The LRX series of power line filters are designed for 277 volt line-to-ground, 480 volt line-to-line, 0 to 60 Hz applications. However, these filters can also be used for lower voltage ratings, such as 120/208 volts, with no adverse effect. 

Key Product Information


Specifications Select a tab below for more information


​Model Number
​Current Rating
​Stopband Insertion Loss
​LRX-2005-S2
​2 x 5 A
​100 dB, 14 kHz to 40 GHz
​LRX-2010-S2
​2 x 10 A
​100 dB, 14 kHz to 40 GHz
​LRX-2020-S2
​2 x 20 A
​100 dB, 14 kHz to 40 GHz
​LRX-2030-S2
​2 x 30 A
​100 dB, 14 kHz to 40 GHz
​LRX-2050-S2
​2 x 50 A
​100 dB, 14 kHz to 40 GHz
LRX-2060-S2​
​2 x 60 A
​100 dB, 14 kHz to 40 GHz
LRX-20751-S2​​2 x 75 A
​100 dB, 14 kHz to 40 GHz
LRX-2100-S2​​2 x 100 A
​100 dB, 14 kHz to 40 GHz

NOTE: For Installation on shield, filters can be ordered with penetration kit. Add "/PEN" to model numbers.

1 Non UL Listed

​Model Number
​Case Height ("A")
​Case Width ("B")
​Case Depth ("C")
​Approximate Weight
​LRX-2005-S2
​94.0 cm (37.0 in)
​22.9 cm (9.0 in)
12.7 cm (5.0 in)​​27.2 kg (60.0 lb)
​LRX-2010-S2
94.0 cm (37.0 in)
​22.9 cm (9.0 in)
​12.7 cm (5.0 in)​
​27.2 kg (60.0 lb)
​LRX-2020-S2
​94.0 cm (37.0 in)
22.9 cm (9.0 in)​​12.7 cm (5.0 in)​
​27.2 kg (60.0 lb)
​LRX-2030-S2
​94.0 cm (37.0 in)
22.9 cm (9.0 in)​
12.7 cm (5.0 in)​
​27.2 kg (60.0 lb)
​LRX-2050-S2
111.8 cm (44.0 in)​
​35.6 cm (14.0 in)​
​15.2 cm (6.0 in)​
​45.4 kg (100.0 lb)
LRX-2060-S2​
111.8 cm (44.0 in)​
​35.6 cm (14.0 in)
​15.2 cm (6.0 in)​
​45.4 kg (100.0 lb)
LRX-20751-S2​​111.8 cm (44.0 in)​
​35.6 cm (14.0 in)
​15.2 cm (6.0 in)​
​45.4 kg (100.0 lb)
LRX-2100-S2​​111.8 cm (44.0 in)​
​35.6 cm (14.0 in)
​15.2 cm (6.0 in)​
​45.4 kg (100.0 lb)

NOTE: For Installation on shield, filters can be ordered with penetration kit. Add "/PEN" to model numbers.

1 Non UL Listed

  • ​Can be provided in custom sized cases to adapt to shielding computer racks
  • Cases can be fitted with electrical outlets
  • Custom sized panels for unique install requirements
  • Optional mounting hardware


Notes:

1. Triple and quad circuit (three and four wire) filters are available.
2. Custom case sizes and special performance characteristics are available.
3. If penetration assembly is required, add “/PEN” to model number when ordering. Contact the Application Engineering Department for further information.

View BIM Models of our Product Options Below:

 

 

Key Features

  • ​​​​​Part of Our LRX Series of Filters
  • Designed for 277 volt line-to-ground, 480 volt line-to-line, 0 to 60 Hz Applications
  • Manufactured to the Most Current Version of UL-1283
  • In accordance with the Low Voltage Directive
  • LRX Power Line Filters meet the following standards:
    • MIL-F-15733
    • MIL-STD-220C
    • UL 1283 5th ed.
    • IEC 60939
    • LVD (2006/95/EC)

Literature and Videos

View Product Information Bulletin
Date Last Updated: Wednesday, September 25, 2019
L o a d i n g

 Catalog-Item Reuse