Solutions for


Find a Rep or Distributor

Home /  Automotive / 

Automotive Chambers

FACT™ Chambers

  • FACT™ 3 with 2 M QZ Chambers   |   Datasheet
    ETS-Lindgren's FACT™ 3 Chambers offer semi-anechoic radiated emissions (RE) and fully anechoic radiated immunity (RI) compliance test capability for most international EMC compliance regulations.
  • FACT™ 10 Chambers   |   Datasheet
    ETS-Lindgren FACT™ 10 Chambers offer semi-anechoic radiated emissions (RE) and fully anechoic radiated immunity (RI) compliance test capability for most international EMC compliance regulations.
  • FACT™ 25 CISPR Chambers
    ETS-Lindgren's FACT™ 25 CISPR Chambers offer semi-anechoic radiated emissions (RE) compliance testing over a frequency range of 70 MHz to 18 GHz. The chamber is used for vehicle component level testing in accordance with CISPR 25.
  • FACT™ 5 Chambers   |   Datasheet
    ETS-Lindgren's FACT™ 5 Chambers offer semi-anechoic radiated emissions (RE) and fully anechoic radiated immunity (RI) compliance test capability for most international EMC compliance regulations. FACT 5 Chambers offer the ability to perform RE testing at a 5-meter distance while preserving the ability to perform full compliance testing of applicable 3-meter standards. Results obtained with 5-meter distance have better correlation to those obtained at a 10-meter distance than the ones measured at 3-meter distance.

SpaceSaver™ Chambers

  • SpaceSaver™ 26H Chamber   |   Datasheet
    A semi-anechoic chamber, the SpaceSaver 26H is designed to perform ANSI C63.4/CISPR 16-1-4 and IEC 61000-4-3 compliant radiated immunity measurements.
  • SpaceSaver™ FAR Chamber   |   Datasheet
    A fully anechoic chamber, the SpaceSaver FAR is designed to perform IEC 61000-4-3 compliant radiated immunity measurements.
  • SpaceSaverâ„¢ PC Chamber   |   Datasheet
    A semi-anechoic chamber, the SpaceSaver PC is designed to perform ANSI C63.4/CISPR 16-1-4 and IEC 61000-4-3 pre-compliant radiated immunity measurements.

SMART™ Reverb Chambers

  • RF Reverberation Chamber Tuner   |   Datasheet
    ETS-Lindgren's Tuners are made of large aluminum reflecting sheets supported on either a rigid box (truss)frame or a single spine and designed to provide the efficient reflecting surfaces necessary for use in a RF reverberation chamber.
  • SMART™ 200 Reverb Chambers   |   Manual
    The ETS-Lindgren SMARTTM (Statistical Mode Averaging Reverberation Test-Site) Chambers use the latest developments in proven reverberation technology and experienced chamber construction to create an electromagnetic environment (EME) for immunity testing.
  • SMART™ 80 Reverb Chambers   |   Manual
    The ETS-Lindgren SMARTTM (Statistical Mode Averaging Reverberation Test-Site) Chambers use the latest developments in proven reverberation technology and experienced chamber construction to create an electromagnetic environment (EME) for immunity testing.
USA FINLAND UK FRANCE CHINA JAPAN ONLINE
Tel +1.512.531.6400 Tel +358.2.8383.300 Tel +44(0)1438.730700 Tel +33.1.48.65.34.03 Tel +8610.8275.5086 Tel+ 81.3.3813.7100 info@ets-lindgren.com
Fax +1.512.531.6500 Fax +358.2.8651.233 Fax +44(0)1438.730751 Fax +33.1.48.65.43.69 Fax +8610.8275.5537 Fax +81.3.3813.8068 www.ets-lindgren.com

Information presented is subject to change as product enhancements are made. Contact ETS-Lindgren Sales Department for current specification.