Solutions for


Find a Rep or Distributor

Home /  Wireless / 

Wireless Test Systems

Antenna Measurement System

AMS-7000 Wireless OTA Reverb Test System   |   Datasheet   |   Manual
ETS-Lindgren's AMS-7000 Wireless OTA Reverb Test System is designed to perform accurate and repeatable SISO TRP, TIS and Throughput measurements. The system is based on ETS-Lindgren's longstanding line of SMART™ reverberation chambers, and proven EMQuest antenna measurement automation software.
AMS-8040 Over-The-Air Test Lab   |   Datasheet   |   Manual
THE ETS-LINDGREN AMS-8040 is a self-contained enclosure for making wireless device over-the-air performance measurements. The unit can be used for design verification, pre-certification, production sample testing, desense and regression testing.
AMS-8041 Over-The-Air Test Lab   |   Datasheet   |   Manual
ETS-Lindgren's AMS-8041 is a self-contained enclosure for making wireless device over-the-air performance and passive antenna pattern measurements. The unit can be used for design verification, pre-certi?cation, production sample testing, desense and regression testing. Rolling casters and the ability to pass through 0.9 m x 2.1 m (3 ft x 7 ft.) doors, allow the unit to be readily moved between test stations.
AMS-8050 Antenna Measurement System   |   Datasheet
The ETS-Lindgren Model AMS-8050 Antenna Measurement System is compact, fully anechoic RF enclosure for antenna pattern measurements.
AMS-8055 MIMO Single Cluster Environment Simulator   |   Datasheet
ETS-LINDGREN’S AMS-8055 MIMO SINGLE CLUSTER ENVIRONMENT SIMULATOR is a compact, fully anechoic RF enclosure for making single cluster MIMO OTA performance measurements. The AMS-8055 is freestanding and built on a moveable cart configuration; it fits into parent buildings without special installation or construction.
AMS-8100 Antenna Measurement System   |   Datasheet
The AMS-8100 compact rectangular test chambers are designed for test and measurement applications of wireless telecom devices.
AMS-8500 Antenna Measurement System   |   Datasheet
The ETS-Lindgren AMS-8500 Antenna Measurement System (AMS) packages are a series of turnkey solutions for making antenna measurements of portable wireless telecommunication devices.
AMS-8600 Antenna Measurement System   |   Datasheet
The ETS-Lindgren AMS-8600 Antenna Measurement System (AMS) tapered chamber packages are a series of turnkey solutions for making antenna measurements of portable wireless telecommunication devices.
AMS-8800 Antenna Measurement System   |   Datasheet
ETS-Lindgren's Model AMS-8800 Theta Arm Antenna Measurement System is the newest addition to our AMS-8000 series of antenna measurement systems. This model is ideally suited for automated measurement of antenna performance of wireless devices, and devices with embedded wireless functions.

Measurement Solutions

A-GPS OTA Test System   |   Datasheet
ETS-Lindgren's AMS-8000 system supports fully automated A-GPS receiver performance testing per Version 3.0 of the CTIA's Test Plan for Mobile Station Over the Air Performance. Instrumentation options are available to support A-GPS testing of GSM/UMTS and/or CDMA devices.
AMS-8700 MIMO OTA Test System   |   Datasheet
ETS-LINDGREN'S MODEL AMS-8700 MIMO OTA TEST SYSTEM allows repeatable measurement of radiated performance of wireless devices in a simulated multi-path environment.
AMS-8900 Over-The-Air Test Lab   |   Datasheet
ETS-LINDGREN’S MODEL AMS-8900 SERIES SISO ANTENNA MEASUREMENT SYSTEM is a high speed, multi-antenna array test system. This system is ideally suited for automated measurement of antenna performance of wireless devices, and devices with embedded wireless functions.
WiMAX™ RPT Radiated Performance Test Lab   |   Datasheet
ETS-Lindgren's WiMAX™ RPT Test Lab is fully configured for radiated performance testing of IEEE 802.16e WiMAX™ and WiBro mobile stations, for both WiMAX™ RPT certification or pre-certification as well as research and development testing.

RF Test Solutions

EMCenter™ Modular RF Platform Model 7000-001   |   Datasheet   |   Manual
ETS-Lindgren's EMCenter is a modular RF platform consisting of an integrated micro-controller, modular chassis, and a selection of optional plug-in card modules. It can be used to perform a variety of RF measurement applications.
EMControl™ Positioner Controller Plug-in Card Model 7006-01   |   Datasheet   |   Manual
ETS-LINDGREN'S EMControl is a versatile positioner controller which enables the user to synchronize simultaneous movement of two ETS-Lindgren positioning devices (for example, towers or turntables) and On/Off operation of an additional auxiliary device (LISN, EUT, etc.)
EMGen™ RF Signal Generator Model 7003-001   |   Datasheet   |   Manual
ETS-Lindgren’s Model 7003-001 EMGen RF Signal Generator offers users a convenient and economical solution for signal generation. The EMGen Module is designed to fit into the EMCenterTM Modular Test System and provides the user with a signal generator that can be used in different modes across the 9 kHz to 6 GHz frequency range.
EMPower™ Power Meters Model 7002-002, 7002-004   |   Datasheet   |   Manual
ETS-Lindgren's EMPower Power Meters make fast, accurate power measurements, even at low power levels.
EMPower™ Power Meters Model 7002-006   |   Datasheet
ETS-Lindgren's has extended its range of EMPower™ RF power meters to comply with the measurement requirements of the ETSI 300 328 and 301 893 standards for wideband data transmission systems, including IEEE 802.11TM, Bluetooth® and Zigbee™. The model 7002-006 provides measurements over a frequency range from 10 MHz up to 6 GHz.
EMPower™ Pulse RF, Burst Power Meter Model 7002-003, 7002-005   |   Datasheet   |   Manual
ETS-LINDGREN’S EMPower PULSE RF/BURST POWER METER are designed to perform very fast measurements on high-frequency pulse-shaped signals (RF bursts).
EMSense™ EMF Probe Plug-in Card Model 7007-001   |   Datasheet   |   Manual
ETS-LINDGREN’S EMSense MODULAR PLUG-IN CARD provides an interface for ETS-Lindgren’s battery-powered E-field probes.
EMSense™ EMF Probe Plug-in Card  Model 7007-002   |   Datasheet   |   Manual
ETS-Lindgren's EMSense EMF Probe Plug-In Card provides an interface for ETS-Lindgren's laser-powered E-Field probes. Each EMSense plug-in card supports one ETS-Lindgren E-Field probe.
EMSwitch™ RF Switch Plug-in Cards 7001-00X   |   Datasheet   |   Manual
ETS-LINDGREN’S EMSwitch RF SWITCH PLUG-IN CARDS are general purpose multi-channel switch matrixes, used to switch the RF path of equipment for RF measurement applications, including immunity, emissions, and wireless measurements.

Amplifiers

RF Power Amplifiers Model 8000-001   |   Datasheet   |   Manual
ETS-Lindgren’s Model 8000-01 RF Power Amplifier is a 175W power amplifier, designed primarily for EMC applications that include EN/IEC 61000-4-3, 10 V/m requirements.
RF Power Amplifiers Model 8000-002   |   Datasheet   |   Manual
ETS-Lindgren’s Model 8000-002 RF Power Amplifier is a 275W power amplifier, designed primarily for EMC applications that include IEC/EN 61000-4-3, 20 V/m requirements.
RF Power Amplifiers Model 8000-003   |   Datasheet   |   Manual
ETS-Lindgren’s Model 8000-003 RF Power Amplifier is a 500W power amplifier, designed primarily for EMC applications that include IEC/EN 61000-4-3, 30 V/m requirements.
RF Power Amplifiers Model 8000-004   |   Datasheet   |   Manual
ETS-Lindgren’s Model 8000-004 RF Power Amplifier is a 1000W power amplifier, designed primarily for commercial and military applications that include IEC/EN 61000-4-3, 30 V/m and RS103, 200 V/m requirements.
RF Power Amplifiers Model 8000-005   |   Datasheet   |   Manual
ETS-Lindgren’s Model 8000-005 RF Power Amplifier is a 2000W power amplifier, designed primarily for automotive applications that include ISO 11451-2, 200 V/m requirements.
RF Power Amplifiers Model 8000-020   |   Datasheet   |   Manual
ETS-Lindgren’s Model 8000-020 RF Power Amplifier is a power amplifier, designed primarily for EMC applications including rigorous antenna and test chamber requirements.
RF Power Amplifiers Model 8000-021   |   Datasheet   |   Manual
RF Power Amplifier is a 800W power amplifier, designed primarily for EMC applications that include MIL-STD 461 CS114, Curve 5 requirements.
RF Power Amplifiers Model 8000-022   |   Datasheet   |   Manual
ETS-Lindgren’s Model 8000-022 RF Power Amplifier is a 18W power amplifier, designed primarily for EMC applications that include IEC/EN 61000-4-20 requirements using a GTEM up to 10 V/m.
RF Power Amplifiers Model 8000-023   |   Datasheet   |   Manual
ETS-Lindgren’s Model 8000-023 RF Power Amplifier is a 45W power amplifier, designed primarily for EMC applications that include IEC/EN 61000-4-20 requirements using a GTEM up to 20 V/m.
RF Power Amplifiers Model 8000-024   |   Datasheet   |   Manual
ETS-Lindgren’s Model 8000-024 RF Power Amplifier is a 70W power amplifier, designed primarily for EMC applications that include IEC/EN 61000-4-20 requirements using a GTEM up to 30 V/m.
RF Power Amplifiers Model 8000-025   |   Datasheet   |   Manual
ETS-Lindgren’s Model 8000-025 RF Power Amplifier is a 100W power amplifier, designed primarily for EMC applications that include IEC/EN 61000-4-6, 10 V/m requirements.
RF Power Amplifiers Model 8000-026   |   Datasheet   |   Manual
ETS-Lindgren’s Model 8000-026 RF Power Amplifier is a 2500W/1900W power amplifier, designed primarily for EMC applications that include ISO 11451-2, 100 V/m.
RF Power Amplifiers Model 8000-027   |   Datasheet
ETS-Lindgren’s Model 8000-027 RF Power Amplifier is a 110W power amplifier, designed primarily for EMC applications that include EN/IEC 61000-4-6 requirements.
RF Power Amplifiers Model 8000-028   |   Datasheet
ETS-Lindgren’s Model 8000-028 RF Power Amplifier is a 400W power amplifier, designed primarily for EMC applications that include EN/IEC 61000-4-6.
RF Power Amplifiers Model 8000-030   |   Datasheet   |   Manual
ETS-Lindgren’s Model 8000-030 RF Power Amplifier is a 260W power amplifier, designed primarily for EMC applications that include ISO 11452-4 and DO-160 testing for BCI.
RF Power Amplifiers Model 8000-032   |   Datasheet   |   Manual
ETS-Lindgren’s Model 8000-032 RF Power Amplifier is a 120W power amplifier, designed primarily for EMC applications that include IEC/EN 61000-4-6 requirements.
RF Power Amplifiers Model 8000-033   |   Datasheet   |   Manual
ETS-Lindgren’s Model 8000-033 RF Power Amplifier is a 150W power amplifier, designed primarily for EMC applications that include IEC/EN 61000-4-6 and ISO 11452-4, 100m A requirements.
RF Power Amplifiers Model 8000-034   |   Datasheet   |   Manual
ETS-Lindgren’s Model 8000-034 RF Power Amplifier is a 100W power amplifier, designed primarily for EMC applications that include IEC/EN 61000-4-3, 3 V/m requirements.
RF Power Amplifiers Model 8000-035   |   Datasheet
ETS-Lindgren’s Model 8000-035 RF Power Amplifier is a 35W power amplifier, designed primarily for EMC applications that include IEC/EN 61000-4-3.
RF Power Amplifiers Model 8000-037   |   Datasheet   |   Manual
ETS-Lindgren’s Model 8000-037 RF Power Amplifier is a 150W power amplifier, designed primarily for EMC applications.
RF Power Amplifiers Model 8000-038   |   Datasheet
ETS-Lindgren’s Model 8000-038 RF Power Amplifier is a 200W power amplifier, designed primarily for general purpose EMC applications that include Wireless, Commercial and Automotive.
RF Power Amplifiers Model 8000-041   |   Manual
ETS-Lindgren’s Model 8000-041 RF Power Amplifier is a power amplifier, designed primarily for EMC applications including rigorous antenna and test chamber requirements.
RF Power Amplifiers Model 8000-050   |   Datasheet   |   Manual
ETS-Lindgren’s Model 8000-050 RF Power Amplifier is a 12W power amplifier, designed primarily for EMC applications that include IEC/EN 61000-4-20, 10 V/m requirements.
RF Power Amplifiers Model 8000-051   |   Datasheet   |   Manual
ETS-Lindgren’s Model 8000-051 RF Power Amplifier is a 25W power amplifier, designed primarily for EMC applications including rigorous antenna and test chamber requirements that include EN 61000-4-20.
RF Power Amplifiers Model 8000-052   |   Datasheet   |   Manual
ETS-Lindgren’s Model 8000-052 RF Power Amplifier is a 45W power amplifier, designed primarily for EMC applications that include IEC/EN 61000-4-20, 20 V/m using a GTEM up to 3.1 GHz.
RF Power Amplifiers Model 8000-053   |   Datasheet   |   Manual
ETS-Lindgren’s Model 8000-053 RF Power Amplifier is a 90W power amplifier, designed primarily for EMC applications that include IEC/EN 61000-4-20, 30 V/m using a GTEM up to 3.1 GHz.
RF Power Amplifiers Model 8000-054   |   Datasheet   |   Manual
ETS-Lindgren’s Model 8000-054 RF Power Amplifier is a 180W power amplifier, designed primarily for EMC applications that include IEC/EN 61000-4-3 requirements.
RF Power Amplifiers Model 8000-055   |   Datasheet   |   Manual
ETS-Lindgren’s Model 8000-055 RF Power Amplifier is a 250W power amplifier, designed primarily for automotive and military applications that include Ford CS-2009.1 and GMW 3097 Radar Pulse requirements.
RF Power Amplifiers Model 8000-056   |   Datasheet   |   Manual
ETS-Lindgren’s Model 8000-056 RF Power Amplifier is a 450W power amplifier, designed primarily for automotive and military applications that include Ford CS-2009.1 and GMW 3097 Radar Pulse requirements.
RF Power Amplifiers Model 8100-001   |   Datasheet   |   Manual
ETS-Lindgren's Model 8100-001 RF Power Amplifier is a 200W power amplifier, designed primarily for EMC applications that include EN/IEC 61000-4-3 10 V/m requirements.
RF Power Amplifiers Model 8100-002   |   Datasheet   |   Manual
ETS-Lindgren's Model 8100-002 RF Power Amplifier is a 1000W power amplifier, designed primarily for EMC applications that include EN/IEC 61000-4-3 30 V/m requirements.
RF Power Amplifiers Model 8100-004   |   Datasheet
ETS-Lindgren's Model 8100-004 RF Power Amplifier is a 2000/1000/700W power amplifier, designed primarily for EMC applications that include ISO 11452-2, 200 V/m requirements.
RF Power Amplifiers Model 8100-007   |   Datasheet   |   Manual
ETS-Lindgren's Model 8100-007 RF Power Amplifier is a 75W/50W power amplifier, designed primarily for EMC applications that include IEC-61000-4-3, 10 V/m up to 6 GHz requirements.
RF Power Amplifiers Model 8100-008   |   Datasheet   |   Manual
ETS-Lindgren's Model 8100-008 RF Power Amplifier is a 300W power amplifier, designed primarily for EMC applications that include IEC 61000-4-3, 30 V/m requirements.
RF Power Amplifiers Model 8100-010   |   Datasheet   |   Manual
ETS-Lindgren's Model 8100-010 RF Power Amplifier is a 75W power amplifier, designed primarily for EMC applications that include IEC-61000-4-6, 10 Vrms up to 250 MHz requirements.
RF Power Amplifiers Model 8100-012   |   Datasheet   |   Manual
ETS-Lindgren's Model 8100-012 RF Power Amplifier is a 10000W power amplifier, designed primarily for EMC applications that include MIL-STD 461 RS 103, 200 V/m requirements.
RF Power Amplifiers Model 8100-015   |   Datasheet
ETS-Lindgren's Model 8100-015 RF Power Amplifier is a 300W power amplifier, designed primarily for EMC applications that include MIL-STD 461 RS103, 200 V/m requirements.
RF Power Amplifiers Model 8100-016   |   Datasheet
ETS-Lindgren's Model 8100-016 RF Power Amplifier is a 320W power amplifier, designed primarily for EMC applications that include MIL-STD 461 RS103, 200 V/m requirements.
RF Power Amplifiers Model 8100-017   |   Datasheet
ETS-Lindgren's Model 8100-017 RF Power Amplifier is a 40W power amplifier, designed primarily for EMC applications that include MIL-STD 461 RS103, 200 V/m requirements.
RF Power Amplifiers Model 8100-018   |   Datasheet
ETS-Lindgren's Model 8100-017 RF Power Amplifier is a 40W power amplifier, designed primarily for EMC applications that include MIL-STD 461 RS103, 200 V/m requirements.
RF Power Amplifiers Model 8100-024   |   Datasheet
ETS-Lindgren's Model 8100-024 RF Power Amplifier is a 200W power amplifier, designed primarily for EMC applications that include IEC 61000-4-3, 30 V/m automotive requirements.
RF Power Amplifiers Model 8100-026   |   Datasheet   |   Manual
ETS-Lindgren's Model 8100-026 RF Power Amplifier is a 200W power amplifier, designed primarily for EMC applications that include IEC 61000-4-3, 30 V/m requirements.
RF Power Amplifiers Model 8100-030   |   Datasheet   |   Manual
ETS-Lindgren's Model 8100-030 RF Power Amplifier is a 500W/250W power amplifier, designed primarily for EMC applications that include ISO 11452-4 BCI up to Level IV requirements.
RF Power Amplifiers Model 8100-040   |   Datasheet   |   Manual
ETS-Lindgren's Model 8100-040 RF Power Amplifier is a 15W power amplifier, designed primarily for EMC and general RF applications that require at least 15W from 700 MHz to 6 GHz.
RF Power Amplifiers Model 8100-041   |   Datasheet   |   Manual
ETS-Lindgren's Model 8100-041 RF Power Amplifier is a 25W power amplifier, designed primarily for EMC and general RF applications that require at least 25W from 700 MHz to 6 GHz.
RF Power Amplifiers Model 8100-043   |   Datasheet   |   Manual
ETS-Lindgren's Model 8100-043 RF Power Amplifier is a 60/150W power amplifier, designed primarily for EMC applications.
USA FINLAND UK FRANCE CHINA JAPAN ONLINE
Tel +1.512.531.6400 Tel +358.2.8383.300 Tel +44(0)1438.730700 Tel +33.1.48.65.34.03 Tel +8610.8275.5086 Tel+ 81.3.3813.7100 info@ets-lindgren.com
Fax +1.512.531.6500 Fax +358.2.8651.233 Fax +44(0)1438.730751 Fax +33.1.48.65.43.69 Fax +8610.8275.5537 Fax +81.3.3813.8068 www.ets-lindgren.com

Information presented is subject to change as product enhancements are made. Contact ETS-Lindgren Sales Department for current specification.