Solutions for


Find a Rep or Distributor

Home /  EMC / 

EMC Chambers

FACT™ Chambers

  • FACT™ 3 with 2 M QZ Chambers   |   Datasheet
    ETS-Lindgren's FACT™ 3 Chambers offer semi-anechoic radiated emissions (RE) and fully anechoic radiated immunity (RI) compliance test capability for most international EMC compliance regulations.
  • FACT™ 10 Chambers   |   Datasheet
    ETS-Lindgren FACT™ 10 Chambers offer semi-anechoic radiated emissions (RE) and fully anechoic radiated immunity (RI) compliance test capability for most international EMC compliance regulations.
  • FACT™ 25 CISPR Chambers
    ETS-Lindgren's FACT™ 25 CISPR Chambers offer semi-anechoic radiated emissions (RE) compliance testing over a frequency range of 70 MHz to 18 GHz. The chamber is used for vehicle component level testing in accordance with CISPR 25.
  • FACT™ 5 Chambers
    ETS-Lindgren FACT™ 5 Chambers offer the ability to perform radiated emissions testing at a 5 meter distance. While not required by any current standard, measurements made at a 5 meter distance have better correlation to those obtained at a 10 meter distance. While permitting 5 meter testing, these chambers preserve the ability to perform full compliance testing of applicable 3 meter standards.

SpaceSaver™ Chambers

  • SpaceSaver™ 26H Chamber   |   Datasheet
    A semi-anechoic chamber, the SpaceSaver 26H is designed to perform ANSI C63.4/CISPR 16-1-4 and IEC 61000-4-3 compliant radiated immunity measurements.
  • SpaceSaver™ FAR Chamber   |   Datasheet
    A fully anechoic chamber, the SpaceSaver FAR is designed to perform IEC 61000-4-3 compliant radiated immunity measurements.
  • SpaceSaverâ„¢ PC Chamber   |   Datasheet
    A semi-anechoic chamber, the SpaceSaver PC is designed to perform ANSI C63.4/CISPR 16-1-4 and IEC 61000-4-3 pre-compliant radiated immunity measurements.

MIL-STD Chambers

  • MIL-STD 461E/F Chambers   |   Datasheet
    ETS-LINDGREN’S MIL-STD-461E/F CHAMBER is designed for testing in accordance with the military standard. The chamber’s shell is constructed with Series 81TM modular cell-type shielding panels. Interior end walls, portions of the sidewalls and ceiling are lined in the manner required by MIL-STD-461E/F, using EMC-24PCL absorber.

SMART™ Reverb Chambers

  • RF Reverberation Chamber Tuner   |   Datasheet
    ETS-Lindgren's Tuners are made of large aluminum reflecting sheets supported on either a rigid box (truss)frame or a single spine and designed to provide the efficient reflecting surfaces necessary for use in a RF reverberation chamber.
  • SMART™ 200 Reverb Chambers   |   Manual
    The ETS-Lindgren SMARTTM (Statistical Mode Averaging Reverberation Test-Site) Chambers use the latest developments in proven reverberation technology and experienced chamber construction to create an electromagnetic environment (EME) for immunity testing.
  • SMART™ 80 Reverb Chambers   |   Manual
    The ETS-Lindgren SMARTTM (Statistical Mode Averaging Reverberation Test-Site) Chambers use the latest developments in proven reverberation technology and experienced chamber construction to create an electromagnetic environment (EME) for immunity testing.
USA FINLAND UK FRANCE CHINA JAPAN ONLINE
Tel +1.512.531.6400 Tel +358.2.8383.300 Tel +44(0)1438.730700 Tel +33.1.48.65.34.03 Tel +8610.8275.5086 Tel+ 81.3.3813.7100 info@ets-lindgren.com
Fax +1.512.531.6500 Fax +358.2.8651.233 Fax +44(0)1438.730751 Fax +33.1.48.65.43.69 Fax +8610.8275.5537 Fax +81.3.3813.8068 www.ets-lindgren.com

Information presented is subject to change as product enhancements are made. Contact ETS-Lindgren Sales Department for current specification.