Solutions for


Find a Rep or Distributor

Home /  Categories /  Antennas / 

3116C Double-Ridged Waveguide Horn

3116C Double-Ridged Waveguide Horn

Frequency Range: 10 GHz to 40 GHz. The Model 3116C Double-Ridged Waveguide Horn is the latest addition to a family of double-ridge guide horns for EMC measurement from ETS-Lindgren.
Available for Antennas-2-Go in September 2012.

Print Version Print Version
3116C Manual Product Manual

3116C Datasheet Product Datasheet

Available for immediate delivery

Key Features

  • 10 GHz to 40 GHz Frequency Range
  • 20 W Power Handling Capability
  • Low VSWR
  • Uniform Gain
  • Individually Calibrated

Description

The Model 3116C Double-Ridged Waveguide Horn is the latest addition to a family of double-ridge guide horns for EMC measurement from ETS-Lindgren. This model corrects the lower gain at the upper end of the frequency range, commonly found in ridged waveguide antennas. Users of this antenna benefit from uniform illumination of target surfaces and accurate gain measurement.

Electrical characteristics of this antenna were designed and modeled using powerful workstations running electromagnetic simulation software. Experienced RF engineers worked with our manufacturing team to produce a practical and affordable realization of the modeling process. All production units are individually calibrated at our A2LA accredited lab.

FEATURES

Frequency Range

The Model 3116C sweeps from 10 GHz to 40 GHz without stopping for band breaks, making it ideal for automated testing.

Power Input

The Model 3116C accepts up to 20 W of continuous input power. The antenna’s high gain and low VSWR over its operating frequency translates into efficient amplifier use and higher field strengths.

Uniform Gain, Low VSWR

The Model 3116C has a more uniform gain and antenna factor because of the better behavior of its radiation pattern. Since the pattern is stable over frequency, the gain and the AF also remain stable. The gain has less than 4 dB variation over the entire range.

Flexible Mounting

The Model 3116C comes with a bracket that accepts either a 1/4” 20 thread screw or rear stinger mount.

Individually Calibrated

The 3116C is individually calibrated at 1m per SAE ARP 958.
USA FINLAND UK FRANCE CHINA JAPAN ONLINE
Tel +1.512.531.6400 Tel +358.2.8383.300 Tel +44(0)1438.730700 Tel +33.1.48.65.34.03 Tel +8610.8275.5086 Tel+ 81.3.3813.7100 info@ets-lindgren.com
Fax +1.512.531.6500 Fax +358.2.8651.233 Fax +44(0)1438.730751 Fax +33.1.48.65.43.69 Fax +8610.8275.5537 Fax +81.3.3813.8068 www.ets-lindgren.com

Information presented is subject to change as product enhancements are made. Contact ETS-Lindgren Sales Department for current specification.